Surrey does not renovate bathrooms the way a single-family suburb usually does. The city is built from town centres, new townhome developments, and detached homes where three generations often share one address, and many of those houses carry a secondary suite with its own bathroom. One household can end up needing a primary ensuite, a busy family bathroom, a powder room, and a suite bathroom, all specified in the same project. Add the Fraser Valley’s long wet season, and the vanity in each of those rooms has to be chosen for how it will be used and how well it will dry out.
Stonewood Bath is a Canadian bathroom vanities and quartz countertops brand that builds three lines (Signature, Elements, and Atelier), so one project can mix a drawer-heavy family vanity with a design-led ensuite piece without leaving the brand.
This page lists Stonewood’s authorized dealers in Surrey, explains how to order in five stages, and shows how to plan every bathroom in the house online before you visit a showroom.
For the province-wide picture, see the full British Columbia guide.
Stonewood Bath Dealers in Surrey
Surrey’s Stonewood dealers are spread along the city’s main commercial routes, with locations on 56th Avenue, Comber Way, 84th Avenue, 115 Avenue, and King George Road. Each carries Stonewood vanities, consoles, and stone-top samples. Two locations carry the Andrew Sheret name, so mention which address you plan to visit when you call.
| Dealer | Address | Phone |
|---|---|---|
| Andrew Sheret | 19558 56th Avenue, Surrey, BC V3S 6K4 | 604-534-7421 |
| Andrew Sheret | 13325 Comber Way, Surrey, BC V3W 5V8 | 778-592-5942 |
| Save More Plumbing & Lighting Ltd. | 12387 84th Avenue, Surrey, BC V3W 3G8 | 604-436-0124 |
| The Ensuite South Surrey (Div of EMCO) | 2412 King George Road, Surrey, BC V4P 1H5 | 604-535-2412 |
| Wolseley Surrey | Unit 102-104, 13070 115 Avenue, Surrey, BC V3R 2T9 | 431-338-4529 |
How to find your custom bathroom vanity: 5 stages
Ordering vanities for a Surrey home is easiest when you treat the whole house as one project. The five stages below work room by room.
Stage 1: List every bathroom first. Before measuring anything, write down each bathroom in the project: primary ensuite, family bathroom, powder room, suite bathroom. Then measure each vanity wall (width, depth, height), the plumbing rough-in, and the door swing. Suite bathrooms are often the tightest, so measure those twice.
Stage 2: Match a series to each room. Stonewood Signature suits most Surrey family and suite bathrooms because of its range of sizes and finishes. Stonewood Elements, the console line, works for a design-led ensuite or powder room. Stonewood Atelier is the personalized vanity line for primary suites where the owner wants a floating or freestanding piece.
Stage 3: Pick your finish and top. Signature offers premium painted, stained classic, and wire-brushed oak finishes. In a multi-bathroom project, repeating one finish family keeps the house consistent, while varying the top lets each room have its own character. Ask the dealer for physical samples, because a finish reads differently under a grey Surrey winter sky than it does under showroom lights.
Stage 4: Configure for who uses the room. A suite bathroom shared by tenants or grandparents has different needs than a primary ensuite. Drawer-heavy layouts reduce bending and keep everything visible. For a roomy primary, standard-depth Signature vanities in a double-sink layout with a center drawer tower are common. For a compact suite or powder room, shallow-depth vanity configurations free up floor space.
Stage 5: Order everything through one dealer. Ordering all the bathrooms together lets the dealer coordinate delivery with your builder or contractor and keep finishes consistent. Lead times vary by series, so ask for a delivery window that matches your framing and drywall schedule.
Why custom matters in Surrey’s wet climate
Surrey sits in the Fraser Valley’s coastal rain belt, where wet weather runs from fall through spring and indoor humidity stays higher than in drier Canadian cities for much of the year. Bathrooms that share a wall with exterior siding, or that sit in a lower-level suite, collect more moisture than their owners expect.
Stonewood builds Signature vanities with solid hardwood face-frames, hardwood five-piece doors and drawer fronts, dovetail drawer boxes, and plywood interiors. That construction tolerates damp seasons better than particleboard cabinets, which swell once moisture reaches an exposed edge. Elements consoles use a steel frame with solid wood and stone, so the structure itself does not move with the weather.
Our quartz countertops are non-porous, so they shrug off water, toothpaste, and cleaning products. That makes them the practical choice for a bathroom that several generations share.
Stonewood Bath collections available in Surrey
All three Stonewood series are available through Surrey dealers, and the fullest displays tend to be at the larger supply houses. Call ahead if you want to see a specific finish.
Stonewood Signature. Bathroom vanities in standard and shallow depths, with a wide range of finishes, door styles, and configurations. It is the series most Surrey projects start from, because one finish family can be repeated across several bathrooms.
Stonewood Elements (formerly Unik Stone). Modern bathroom consoles built from solid wood and steel, with natural or engineered stone tops, made to order. A strong fit for a design-led ensuite or a statement powder room in a new townhome.
Stonewood Atelier (formerly DM Bath). Personalized vanities, floating or freestanding, with curated finish and configuration choices. Suited to primary suites in South Surrey and other higher-end renovations.
Find your nearest Surrey showroom
Use the Stonewood Bath dealer locator to find the closest showroom by postal code. It also covers Langley, Delta, White Rock, and the rest of the Lower Mainland.
Become a Stonewood Bath dealer
Stonewood is growing its Lower Mainland network. Supply houses, kitchen and bath showrooms, and builders’ suppliers that want to carry Signature, Elements, or Atelier can start the conversation at stonewoodbath.com.
Frequently asked questions
Can I order vanities for several bathrooms in one project?
Yes. Dealers regularly quote a whole-house list, often one finish family across the house with a different top or series for the primary suite. Bring a room-by-room list with measurements, or a saved set of configurator designs, so the dealer can quote everything at once and coordinate delivery.
How long does a custom Stonewood vanity take to deliver in Surrey?
Signature is the quickest of the three lines. Elements consoles and Atelier vanities are made to order, so they take longer. A multi-room order is usually scheduled around your builder’s timeline, and your dealer will give you a firm window when you place the order.
Does Stonewood Bath have dealers elsewhere in the Lower Mainland?
Yes. See our Vancouver guide and our Coquitlam guide for dealers in those cities. Beyond the Lower Mainland, the network covers Vancouver Island, the Okanagan, and the rest of BC, plus Alberta, the Prairies, Ontario, Quebec, the Maritimes, and Newfoundland. The dealer locator lists every current location.
Click to see the list of Stonewood dealers outside BC
=> Bathroom Vanities & Countertops in Calgary
=> Bathroom Vanities & Countertops in Saskatoon
=> Bathroom Vanities & Countertops in Winnipeg
=> Bathroom Vanities & Countertops in Edmonton
=> Bathroom Vanities & Countertops in Toronto
Ready to start? Find your nearest Surrey Stonewood Bath dealer and book a showroom visit.